The carbide cutter is used for the correction of acrylic and gel nails: rough filing, filing under the nails, shape and length correction. It can also be used for sawing off peelings, removing gel, gel polish and pedicure. Not reversible (works in one direction).
macrO cutters are subject to thermal and liquid sterilization.
Caring for carbide cutters:
It is more reliable to store the cutters in a special, lockable stand. The cutters must be disinfected, cleaned and sterilized after each use and each client.
Immediately after work, place the nozzle in a disinfectant solution; before that, it cannot be rinsed under water. After you have disinfected the nozzle, only then should it be rinsed under running cold water.
Next, clean the nozzle. For ceramic nozzles, special brass brushes are used, which also successfully clean carbide nozzles.
After that, we proceed to sterilization. Either thermal (glass perlen sterilizer, dry heat oven, autoclave) or chemical (concentrates).
Cleaning of any nozzles is carried out qualitatively and quickly in an ultrasonic cleaner. It uses the principle of cavitation and your tools, in addition to disinfection, are also cleaned in parallel.
The abrasive of the cutters is distinguished by the color notch:
green - hard
blue - medium hardness
red - softer
