Brand: macrO
Manufacturer: Germany
Carbide cutter is used for correction of acrylic and gel nails: rough filing, filing under nails, correction of shape and length. It can also be used for peeling off exfoliation, removing gel, gel polish and pedicure. Not reversible (works in one direction).
macrO milling cutters are subject to thermal and liquid sterilization.
Carbide cutter care:
It is more reliable to store cutters in a special stand that closes. It is necessary to disinfect, clean and sterilize the cutters after each use and each client.
Immediately after work, place the nozzle in a disinfectant solution, before that it cannot be washed under water. After you have disinfected the nozzle, only then should you rinse it under running cold water.
Next, clean the nozzle. Special brass brushes are used for ceramic nozzles, which also successfully clean hard alloy nozzles.
After that, we proceed to sterilization. Or to thermal (glasperlene sterilizer, dry oven, autoclave) or chemical (concentrates).
Any nozzles can be cleaned efficiently and quickly in an ultrasonic cleaner. It uses the principle of cavitation and your tools, in addition to disinfection, are also cleaned at the same time.
Abrasive cutters are distinguished by a colored notch:
- green - hard
- sinya - of medium hardness
- red - softer
