Brand: macrO
Manufacturer: Germany
The carbide cutter 274050PRO has a unique tooth shape, due to which the cutter heats up less during operation, and the nano-coating protects the cutter from high temperatures and aggressive chemicals. It also provides the nail drill bit with a longer service life.
The carbide nail drillbit is used for the correction of acrylic and gel nails: rough cutting, under-nail cutting, shape and length correction. It can also be used for cutting off exfoliation, removing gel, gel polish, and pedicure.Not reversible (works in one direction).
MacrO drill bits are subject to thermal and liquid sterilization.
Carbide nail drill bits care:
Store the drill bits in a lockable storage case for safe keeping. Disinfect, clean and sterilize the drill bit after each use and each client.
Immediately after work, place the handpiece in a disinfectant solution; do not rinse it under water. After you have disinfected the handpiece, only then should you rinse it under running cold water.
Next, clean the handpiece. For ceramic handpieces, special brass brushes are used, which can also successfully clean carbide handpieces.
After that, we proceed to sterilization. Either thermal (glasperlene sterilizer, dry heat oven, autoclave) or chemical (concentrates).
Cleaning of any nozzles is quick and efficient in an ultrasonic sink. It uses the principle of cavitation and your instruments are cleaned in parallel with disinfection.
The abrasive of the drill bits is distinguished by a colored notch:
- green - hard
- blue - medium hardness
- red - softer
